蘇州市十大正规网赌平台係統有限公司
服務熱線:400-928-9658
Banner
首頁 > 新聞動態 > 內容

AB點膠機和灌膠機的異同點分析

1、膠量和膠水的使用不同,雙液灌膠機一般是使用大膠量去灌膠,而定製點膠機是使用小膠量或是微量去點膠,膠水分為單組份膠水和雙組份膠水,而使用單組份膠水的為點膠機的較多,使用雙組份膠水的一般是是灌膠機。

The use of glue and glue is different. The glue machine is usually used to remove glue with large amount of glue, and the glue dispenser is a small amount of glue or a trace of glue. The glue is divided into single component glue and double component glue, while the single component glue is used more for the glue dispenser.

2、供膠係統和使用性質不同,點膠機通常是采用板卡氣壓控製膠水,灌膠機則根據膠水填充料情況,選用齒輪泵、螺杆泵、活塞泵等泵體將兩種膠水定量、配比、混合後再灌到產品。點膠機適用於產品點、塗、畫圓、走各種異形軌跡等,而灌膠機適用於產品密封灌膠,防水灌膠通常以定點為主。

The glue supply system and its use are different. The glue dispenser usually uses the plate pressure to control the glue. The filling machine is based on the rubber filling material, and the two kinds of glue, such as the gear pump, the screw pump and the piston pump, are selected, and the two kinds of glue are quantified, mixed, and then mixed to the product. Dispensing machine is suitable for product point, coating, round and various irregular tracks, etc. the glue filling machine is suitable for sealing products and glue filling.

3、應用領域不同,點膠機通常用於小型產品點膠,如手機外殼、手機按鍵、對講機、揚聲器、音響、PCB、電子元件等產品點塗膠,灌膠機通常用於LED電源,防水電源,驅動電源,電容,變壓器,點火線圈、濾清器、洗牆燈、LED軟燈條、線燈條等各類產品密封,防水,防潮灌封。

The application field is different, the glue dispenser is usually used for small product glue, such as mobiles phones shell, mobiles phones keys, interphones, loudspeaker, audio, PCB, electronic components and other product points. The gumming machine is usually used for LED power, waterproof power, driving power, capacitance, transformer, ignition coil, filter, wall lamp, LED All kinds of products, such as soft strip, line lamp and so on, are sealed, waterproof, moistureproof and sealed.

 

地址:蘇州市吳中區胥口鎮浦莊大道3999號1棟2樓  電話:400-928-9658  手機:13812751916  電子郵箱:szswdjm@163.com

版權所有:蘇州市十大正规网赌平台係統有限公司手機版

網站地圖:sitemap
网站地图:sitemap